Tascam MX-8A 8-kanalni matrični mešalnik z DSP

Matrični 10×10 mešalnik MX-8A

MX -8A ima 8 mikrofonsko/linijskih vhodov, 8 linijskih izhodov in stereo USB I/O za povezavo s konferenčnimi platformami. Vgrajen ima zelo zmogljiv DSP procesor, ki omogoča mešanje, usmerjanje in procesiranje zvoka. Uporabimo ga lahko v sejnih sobah, delovnih središčih, sodiščih, restavracijah, trgovinah in drugih prostorih.

Lastnosti:

8 Simetričnih mikrofonsko/linijskih vhodov, 8 simetričnih linijskih izhodov
USB avdio vmesnik za snemanje in predvajanje zvoka preko računalnika
Euroblock konektorji za stalne vgradne postavitve
Vgrajeno kakovostno napajanje

Specifikacije

General
Audio formats	44.1/48 kHz, 16/24 bit

Inputs and outputs
USB port	4-pin USB B-type
Transfer rate	USB 2.0 High Speed (480 Mbit/s)
Analogue inputs (ANALOG IN)	Balanced Euroblock connectors, 3.81 mm pitch
Minimum input level	–70 dBu
Maximum input level	+26 dBu
Input impedance	≥2.2 kΩ
Analogue outputs (ANALOG OUT)	Balanced Euroblock connectors, 3.81 mm pitch
Nominal output level	+4 dBu (Ref(D) ≠ –9 dBFS) +6 dBu (Ref(D) = −9 dBFS)
Maximum output level (selectable)	+15 dBu (Ref(D): –9 dBFS) +18 dBu (Ref(D): –14 dBFS) +20 dBu (Ref(D): –16 dBFS) +22 dBu (Ref(D): –18 dBFS) +24 dBu (Ref(D): –20 dBFS)
Output impedance	≤200 Ω
RS-232C connector	D-sub 9-pin (female, inch-standard)
RS-485 connector	RJ-45 connector
Recommended cable	STP cable, Cat 5e or faster
Network connector (ETHERNET)	RJ-45 connector
Transmission protocol	TCP/IP
Ethernet standard	100BASE-TX
Recommended cable	STP cable, Cat 5e or faster

Audio performance
Mic amp EIN (equivalent input noise)	≤−126 dBu (Mic in to Line out, input impedance: 150 Ω, 22 kHz LPF, A-weighted, JEITA)
Frequency response	20 Hz – 20 kHz, ±0.5 dB (+24 dBu input, Line in to Line out, GAIN at min., JEITA)
Distortion (THD+N)	<0.005 % (+24 dBu input, 1 kHz, Line in to Line out, GAIN at min., JEITA)
S/N ratio	≥106 dB (+24 dBu input, Line in to Line out, GAIN at min., JEITA)
Crosstalk	≥107 dB (+24 dBu input, 1 kHz, Line in to Line out, GAIN at min., JEITA)
Dynamic range	≥105 dB (Line in to Line out, GAIN at min., JEITA)
Note: JEITA indicates compliance with JEITA CP-2150

Power supply and other specifications
Voltage requirements	AC 100–240 V, 50/60 Hz
Power consumption	21 W
Dimensions	483 mm × 45 mm × 304 mm (W × H × D, including protrusions)
Weight	3 kg
Permissible operating temperature range	0–40 °C