Audio Kondrič
the audio company

LD Systems DIO 44 4×4 input/output Dante interface

  • LD Systems DIO 44 4×4 input/output Dante interface zagotavlja zmogljivosti, ki jih avdio in AV profesionalci resnično potrebujejo.

Cena na zahtevo

Več informacij: Tel.: 02 / 776 10 51  ali e-mail: info@kondric.si

Opis

LD Systems DIO 44 4×4 input/output Dante interface

  • Four input and output Dante interface
  • Connect microphones or line level inputs
  • Four-step gain control and 24V phantom power per channel
  • Terminal blocks for all analogue connections
  • Signal indicators on each channel
  • Use PoE or an external power supply
  • Use as a PoE injector to power another networked device
  • Daisy-chain Dante devices together
  • Easy front panel configuration and user lock

Description

Part of the TICA® series, the DIO 44 is a four input and output Dante interface that delivers the capabilities that audio and AV professionals really need. Equipped with four balanced mic/line inputs and line outputs with four-step gain settings and 24V phantom power on each input. Signal presence lights on each channel speed installation and fault-finding.

The DIO 44 is easy to configure from the front panel and can then be locked to prevent tampering.

Power from any PoE+ network switch or use the optional, external power supply. Since it comes with two Dante networked ports, you can daisy chain devices together. It also works as a PoE+ injector: if you use the external power supply, you can power one further networked device in the chain.

Its tiny form factor (142 x 43 x 221mm) and included mounting plates allow it to be installed discreetly behind screens or under tables. Alternatively, it fits into 1/3 19 inch rack. Use the optional rack tray to slot up to three TICA® series products alongside each other and build a system to your exact requirements, using minimal rack space.

Terminal block connections on the analogue inputs and outputs make wiring easy.

The perfect solution for professional installers wanting to interface into Dante equipment.

Dante Domain Manager and AES 67 compliant.

Povezava na uradno spletno stran izdelka. LINK: LD Systems DIO 44 4×4 input/output Dante interface

Dodatne Informacije

  • Product type 4×4 I/O Dante Interface
  • Inputs 4
  • Input type Switchable Balanced mic or line level
  • Line outputs 4
  • Output type Balanced line level with auto mute relay on loss of Dant
  • Cooling Convection
  • Number of input connectors 4
  • Connector 3-pin terminal block (3.81 mm)
  • Mic input sensitivity 55mV (Gain +30dB switch)
  • Nominal input clipping 20 dBu (Sine 1kHz), Gain 0dB switch
  • Frequency response 10 hz – 20 kHz ( 0,5 dB)
  • THD + Noise < 0.003% (0dB switch, 4 dBu, 20 kHz BW)
  • DIM < -90dB (+ 4 dBu)
  • Input Impedance 10 kohms (balanced)
  • Crosstalk < 105dB (20 kHz BW)
  • SNR > 112 dB (0dB switch, 20 dBu, 20 kHz BW, a-weighted)
  • CMRR > 50 dB
  • High Pass Filter 100Hz (-3dB, when +15 or +30dB is selected)
  • Phantom Power (per input) + 24 VDC @ 10 mA max
  • Gain -15dB, 0dB, +15dB, +30dB
  • Number of output connectors 4
  • Line Output Connectors 3-pin terminal block (3.81 mm)
  • Max. output level 18 dBu
  • Intermodulation Distortion (SMPTE) < 0,005 % (-20dBFS to 0dBFS)
  • THD + N < 0.002% (10 dBu, 20 kHz BW)
  • Idle Noise > – 92 dBu
  • Dynamic Range > 107 dB (0dBFS, AES 17, CCIR-2k Weighting)
  • Frequency range 15 Hz – 20 kHz (-0,5 dB)
  • Audio Channels 4 inputs / 4 outputs
  • Bit depth AD/DA converter 24 bit
  • Sampling frequency 48 kHz
  • System Latency: Minimum 1ms
  • Connector DANTE 100 BASE-T RJ45
  • General
  • Analogue Input Section
  • Analogue line outputs
  • Dante™ Specifications
  • PoE ( Power over Ethernet )
  • 3. 6. 24, 10:01 LD Systems DIO 44 | Dante Interfaces | LD Systems
  • https://www.ld-systems.com/en/solutions/integrated-systems/audio-tools-sources/dante-interfaces/30329/dio-44#detail-
  • specifications 1/2
  • Minimum PoE Requirements PoE+ IEEE 802.3at
  • PSE+ Data Capable of powering 1 extra PD unit
  • Input voltage 24 V DC
  • Minimum Current 1.5 A
  • Power connector Pitch 5,08 mm terminal block (2-pin)
  • Max. Power consumption 10 W
  • Idle power consumption 7.5 W (no signal input)
  • Power Consumption with Secondary Port 22 W
  • Mains Inrush Current 1.7A @ 230V AC
  • Operating temperature ( non-condensing ) 0°C – 40°C; < 85% humidity
  • Material Plastic Front panel, Steel chassis
  • Dimensions (W x H x D) ( height with rubber feet ) 142 mm x 53 mm x 221.7 mm
  • Weight 1,04 kg
  • Accessories (included) Mounting plates for surface mount applications, rubber f
    for electrical connections

Navodilo za uporabo

Navodilo za uporabo. LINK

Povezani izdelki