4-kanalni instalacijski ojačevalnik, 4x600W DAP Audio Qi-4600

4-kanalni instalacijski ojačevalnik, 4x600W DAP Audio Qi-4600

The Qi-amplifier range is developed for installation use to create a perfect match with the Xi installation speaker range. Due to the rugged steel housing it can also be applied for mobile use. With only 1U it gives power for 4 channels. All 4 channels are individual controllable and bridge mode can be set for each stereo pair. With the SMPS and Class-D amplification it is a light weight solution with a high efficiency power consumption / power output ratio. An advanced protection circuit will protect the amplifier and it’s connected speakers. It has a short circuit/ thermal, DC ,RF protection and a soft start system. The Qi-amplifiers are made with high-quality low deviation components to ensure a perfect sound quality and a long life time.

Specifikacije

Stereo 4Ohm: 4x 600W
Stereo 8Ohm: 4x 360W
Bridge 8Ohm: 2x 1200W
S/N Ratio: >90dB Input sensitivity: 0,775V
Input impedance: 20kOhm Bal./10Kohm unbal.
Technology: Class-D
Protection: short circuit, DC, RF, Soft start
Cooling: Temp controlled fan Power supply: SMPS

Dodatne Informacije

2 ohms Stable No
Output per Channel into 8 ohms at 1 kHz 360 W
Output per Channel into 4 ohms at 1 kHz 600 W
Bridge Output into 8 ohms at 1 kHz 1200 W
Output per Channel into 8 ohms from 20 Hz – 20 kHz 360 W
Output per Channel into 4 ohms from 20 Hz – 20 kHz 600 W
Bridge Output 8 ohms from 20 Hz – 20 kHz 1200 W
Output Channels 4
Output Mode 4-channel, Bridge, Stereo
Output Connector Speaker Connector 4 pole
Inputs
Mono Inputs 4
Mono Input Connector 3-pin XLR
Balanced Mono Input Maximum Level 20 dBu
Mono Input Impedance 20 Ω
Unbalanced Mono Input Sensitivity 1 dBv Audio Specifications
THD Level < 0.5 %
Signal-to-noise Ratio > 90 dB
Slew Rate 25 V/μs
Amp Technology Class D
Damping Factor 200 :1
Frequency Response Minimum 10 Hz
Frequency Response Maximum 20000 Hz
Electrical Specifications and Connections
Power Supply 100-240 V AC 50/60 Hz
SMPS Yes
Power Consumption 1490 W
Fuse 12 A
Power Connector In IEC
Mechanical Specifications
Amplifier Airflow Front to back
Amplifier Cooling Axial fan
Height (mm) 44 mm
Width (mm) 483 mm
Length (mm) 390 mm
Installation Depth (Excl. Connector) 390 mm
Flightcase Size 19″
Rack Units 1 U
Housing Metal
Colour Black
Finish Powder Coating
Weight 6.4 kg
IP Rating IP20 (indoor use only)
Product Properties
Electronic Protection Clip limiter (fixed), DC voltage, RF, Short circuit, Softstart, Thermal
LED Indicators Clip, Power, Protect, Signal
Included Items
Included Cables IEC cable
Included Accessories Rubber feet