Audio Kondrič
the audio company

LD Systems AMP 205 ojačevalnik

LD Systems AMP 205 ojačevalnik

  • 2-Channel Mini Installation Power Amplifier 2×50 W @ 4 Ohm

Opis

LD Systems AMP 205 ojačevalnik

Professional mini amplifier
2 x 50W Class-D amplifier with low impedance outputs
Small form factor 1/4 19″ rack, 1U
Silent operation with passive cooling
Connect to third party control for remote standby and volume control
External 100-240V power supply
Mounting plates for flexible inconspicuous installation, even above suspended ceilings
Auto standby to save power
Balanced line input and loudspeaker output on terminal strips
User-friendly front panel with signal, clip and protection LEDs
Optional rack tray for combining with other TICA® series products

The LD AMP205 is a professional 2-channel mini installation amplifier. Part of the TICA® series, it combines of compact size, passive cooling, and high efficiency – ideal for a diverse range of audio installation applications.
Powered by a highly efficient 2x50W Class-D amplifier, it features 4 Ohm outputs and a user-friendly front panel, equipped with signal, clip, and protection LEDs. A gain switch helps the amplifier deal with a variety of input sources.
It’s tiny 106 x 44 x 222 form factor and included mounting plates allow it to be installed discreetly almost anywhere; behind screens, under tables or even in in air-handling spaces and above plenum ceilings. Alternatively, it fits into ¼ 19 inch rack. Use the optional rack tray to slot up to four TICA® series products alongside each other and build a system to your exact requirements, using minimal rack space.
With remote control connectivity for third-party devices, you can adjust volume on either channel or put the power amplifier into standby mode at any time, even when it’s hidden. Optional auto-standby saves power when no audio is running.
Terminal block connections for balanced line inputs and loudspeaker outputs make installation simple.
The perfect solution for professional installers and users looking for a compact, highly efficient and easy-to-integrate solution.

LD Systems izdelkiLD Systems AMP 205 ojačevalnik

Vsi tehnični podatki, opisi in galerije so na voljo na  uradni spletni strani proizvajalca

Smo uradni uvoznik ter uradno pooblaščeni serviser v garancijskem in izven garancijskem roku za produkte Adam Hall, LD Systems, Cameo, Palmer, kupljene v katerikoli trgovini v Sloveniji ali drugje v EU

Tehnični podatki

General
Product type Installation power amplifier
Line inputs 2
Line input connectors 2 balanced line inputs, Pitch 3.81 mm terminal block (3-pin)
Line outputs 0
Powered outputs 2 with output mode selector (stereo / parallel / high power mode)
Cooling Convection
Priority levels 1
Input area

 

Nominal input sensitivity 14 dBu / 2 dBu (Gain +12dB switch)
Nominal input clipping 18 dBu (sine 1kHz, gain 0dB)
Input connector 2 x 3.81mm Terminal Block 3-pin
Standby wake up threshold 2.5 seconds
Type Class D
Output modes High power mode (ST / PAR / HPM), Parallel, stereo
Amplifier Outputs 2- channel (ST, PAR) / 1-channel (HPM)
Connector 4 – pin terminal block (pitch 5.08mm)
RMS Power ( W ) 1 x 100 W @ 2ohm (Continuous sine wave 1kHz 10sec, 4 ohm load), 2 x 50 W @ 4ohm (ST, PAR)
Power ( Peak ) (W) 1 x 110W @ 2ohm (Continuous sine wave 1kHz 10sec, 4 ohm load), 2 x 55 W @ 4ohm (ST, PAR)
Minimum load impedance 2 Ohms (HPM mode), 4 Ohm (stereo and parallel mode)
Frequency range 15 Hz – 20 kHz (-0,5 dB)
Protection circuits DC, over-current, short circuit, thermal overload, Undervoltage
Power supply

 

Type1 External SMPS
Operating voltage 100 V AC – 240 V AC, 50 – 60 Hz
Fuse 0
Secondary Voltage 24 V DC
Secondary Current 5 A
Secondary connector Terminal block 5.08 mm 2-pole
Primary Connector IEC
Safety class 1
Max. power consumption 105 W (sine 1kHz with 4 ohm load)
Idle power consumption 2 W (no signal input)
Standby power consuption < 1 W
Operating temperature ( non-condensing ) 0°C – 40°C; < 85% humidity
General data

 

Time to Auto-standby 20 Min.
Dimensions (W x H x D) ( height with rubber feet ) 106 mm x 53 mm x 221.7 mm
Accessories (included) External Power Supply, Mounting plates for surface mount applications, Terminal blocks for electrical connections.
Weight 1 kg

Video produkta

Navodilo za uporabo

Navodilo za uporabo. LINK

Povezani izdelki